Flue Gas Analyzer System (ZSU-7)
Continuous monitoring of 7 components:
NOx, SO2, CO, CO2, O2, HCl, and dust
- Ideal for environmental monitoring
- Space-saving design
- All the necessary equipment are housed in a cabinet of 1215 (W) x 700 (D) x 1780 (H) mm size
- Less electrical work: signal and power terminals are in one place
- Maintenance-free HCl measurement
- Saves power by 40% compared to conventional models
NDIR gas analyzer (ZKJ)
| Item | Specifications |
|---|---|
| Ranges | NOx: 0–50 ppm…5000 ppm SO2: 0–50 ppm…5000 ppm CO: 0–50 ppm…5000 ppm CO2: 0–10% or 0–20% O2: 0–10% or 0–25% |
| Principle | Non-dispersive infrared sensor(double beam) Zirconia sensor for O2 measurement |
| Repeatability | ±0.5% FS |
| Zero drift | ≤ 1.0 % FS per week ≤ ±2.0% FS per week for the range below 200 ppm ≤ ±2.0% FS per month for O2 measurement |
| Span drift | ≤ ±2.0% FS per week O2 measurement: ≤ ±2.0% FS per month |
| Gas sampling amount | Approx. 2 L/min |
| Response speed | ≤ 120 s for 90% response from inlet ≤ 240 s in SO2 measurement |
| Output signal | 4–20 mA DC |
| Auto calibration | Zero and span (calibration cycle configurable) |
| Display | Backlit LCD Instantaneous value, O2-corrected instantaneous value, O2-corrected average value, O2 average, CO peak count, parameter setpoint English or Japanese |
Gas analyzer system
| Item | Specifications | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dimensions | Indoor type: 1215 (W) x 700 (D) x 1780 (H) mm | ||||||||
| Power supply voltage | 100 V AC, 50/60 Hz, approx. 1200 VA | ||||||||
| Weight | Approx. 500 kg | ||||||||
| Output signal | 4–20 mA DC (insulated) | ||||||||
| External contact output | SPST no-voltage contact, up to 8 points (Under maintenance, under auto-calibration, analyzing section error, CO peak count alarm, etc.) |
||||||||
| External contact input | No-voltage contact (auto-calibration start, average value reset, measurement stop) | ||||||||
| Computing unit | Calculates moving average and O2 corrected gas concentration, in dust measurement | ||||||||
| Recorder (option) | Inkjet or paperless | ||||||||
| Ambient temperature | -5 to +40°C, -10 to +40°C, or -15 to +40°C | ||||||||
| Gas conditions |
|
Gas extractor (ZBAK)
| Item | Specifications |
|---|---|
| Principle | Electric heating system (with 316 Stainless steel wire mesh filter, 40 µm) |
| Gas temperature & material | Standard: 60–800°C (316 SS) Optional: 1000°C (titanium), 1300°C (Sic) |
| Mounting | JIS 5K 65A flange |
| Power supply voltage | 100 V AC, 50/60 Hz, Heated tube: approx. 720 VA per 20 m |
| Gas inlet tube | Heated tube (30 m max.) or φ10/φ8 mm Teflon tube |
Laser HCl analyzer (ZSS)
| Item | Specifications |
|---|---|
| Target gas | HCl, NH3, O2, HCl + H2O, NH3 + H2O, CO, CO2, CH4, CO + O2, CO + CO2 |
| Principle | Non-dispersive infrared (NDIR) |
| Method | Cross-stack |
| Laser class | CLASS 1M |
| Measurement range | 10 ppm·m to 5000 ppm·m |
| Measurement light length | 0.5–10 m (diameter of smokestack) |
| Repeatability | ±1.0% FS |
| Zero drift | ±2.0% FS/6 months |
| Response speed (90% response) | ≤ 5 s |
| Gas temperature | ≤ 1200°C |
| Mounting | JIS10K 50A or 100A flange |
| Air purge | Instrument air, pressure ±10 kPa, flow rate 20 L/min or more |
| Signal cable length | 100 m max. between receiver unit and control unit |
| Display | LCD (instantaneous value, converted instantaneous value, converted moving average value, etc.) |
Dust analyzer
| Item | Specifications |
|---|---|
| Measuring object | Dust concentration |
| Principle | Electrostatic induction |
| Range | 0.01 to 1000 mg/m3 |
| Probe length | ≤ 1500 mm |
| Signal cable length | ≤ 1000 m between detector and transmitter |
| Display | LCD (bar graph, numeric values, trend display) |
